Newest build

cunokyle · #1 05-07-2009, 10:12 PM

http://www.youtube.com/watch?v=xkMW-YEspw4
Camera sucks.

Much better camera:

http://www.youtube.com/watch?v=xdEvXHwbtbk

Box is 7.5ft^3 tuned to 20hz (built the port wrong). Will be building a new box for it this weekend which will be 7ft^3 tuned to 35hz.

Uncle Jesse · #2 05-08-2009, 11:56 AM

now i want a system again

cunokyle · #3 05-15-2009, 06:56 PM

Building a new box for him this coming week. We are going to then get it metered at 20hz tuning and 35hz tuning (each separate box) and then in June we will be hitting competitions.

I will hopefully have something done for the Camaro in the coming months. Looking at going with a single 15" Icon and walling off the rear hatch. We will see what happens.

Uncle Jesse · #4 05-16-2009, 02:49 AM

good luck brother and go kick some hiney!

cunokyle · #5 05-18-2009, 09:18 AM

Hopefully will be able to get a video or two this evening. The guy I designed and helped build this for was putting primer on it last night after we got it put together.

Azazel · #6 05-18-2009, 12:20 PM

didn't look like it in the pics but also hard to see.. did you brace the center of the box?

also with the boxes we build we usually try to double wall the front (two layers of MDF. u can use the second later to help flush the subs in the face. makes the box look a little nicer and adds some structeral integrity.

cunokyle · #7 05-18-2009, 02:05 PM

Quote:

Originally Posted by Azazel

didn't look like it in the pics but also hard to see.. did you brace the center of the box?

also with the boxes we build we usually try to double wall the front (two layers of MDF. u can use the second later to help flush the subs in the face. makes the box look a little nicer and adds some structeral integrity.

The front of the box is going to be double baffled when done. We are using threaded rod to brace from the front to the rear and the port.